XA50 Pro

Manufacturer: NovaStar

Fully verified 5G Series Manufacturer class: Receiving Card

The XA50 Pro is a high-end 5G receiving card in NovaStar's COEX series control system. For 8bit and 10bit video sources and PWM driver ICs a single card supports resolutions up to 1024×512@60Hz (620×512@60Hz for 12bit sources); it uses DDR3 connectors and handles up to 40 groups of parallel RGB data or 64 groups of serial data, with LVDS transmission supported.

Price A quote tailored to your project

The price is provided with the quote, based on quantity, delivery address and project scope.

The price of this product is set by quote. Add it to your cart and request the quote together.

Design a solution with this manufacturer

Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
Compatibility checkCompatibility with the other components is checked during configuration.
Order trackingShipping and installation status is tracked on your order page.

Key specifications

View Technical Details

Capacity: 524.3 K px
Area: 1024×512
Data groups: 40
Port: 5 Gbps

Planning a complete display?Let's calculate the system that works with this device together. Calculate

Best suited for

Driving a cabinet or module group of up to 1,024 × 512 pixels with a single card.
High-density systems on 5 Gbps links (with a controller of the same speed class).
Permanent installations that need temperature / voltage monitoring.

Key features (manufacturer)

Up to 1024×512@60Hz for 8bit and 10bit video sources with PWM driver ICs; up to 620×512@60Hz for 12bit video sources
5G receiving card with DDR3 connectors; up to 40 groups of parallel RGB data or 64 groups of serial data, plus LVDS transmission
Adaptive Thermal Compensation, Dynamic Booster, Full-Grayscale Calibration and Image Booster (color management, precise grayscale, 22bit+)
HDR10 (SMPTE ST 2084 and SMPTE ST 2086) and HLG
Frame Rate Adaptive 3.0 for input frame rates from 23 Hz to 240 Hz; Shutter Fit for camera shooting in xR scenarios
Multi-Mode, Brightness Overdrive, and Seam Correction with Mobile Phones (requires TU series products)
Latency on the receiving card end can be reduced to 1 frame (modules with driver ICs with built-in RAM)
Dual card backup, loop backup, dual backup of configuration parameters and dual program backup

Capacity and loading area

The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 524,288 px.

Technical specifications

Backup / redundant line
HDR
Pixel calibration
Mapping
Monitoring (temperature / voltage)

Capacity and outputs

Loading capacity: 524,288 px
Official loading area: 1,024 × 512 px
Port speed: 5 Gbps
Data groups: 40
HUB interface: DDR3 connectors

Inputs and playback

Max. frame rate: 240 Hz

Physical

Dimensions: 67.6 mm × 35.0 mm × 4.3 mm
Weight: 10.4 g
Operating temperature: -20°C to +70°C
Input voltage: DC 3.8 V to 5.5 V
Power consumption: 5 W

Manufacturer-specific technical data

In the manufacturer's own wording (the original English terms are kept).

Capacity

Maximum resolution (8bit and 10bit video sources): 1024×512@60Hz
Maximum resolution (12bit video sources): 620×512@60Hz
Condition stated in the introduction: For 8bit and 10bit video sources and PWM driver ICs, up to 1024×512@60Hz

Interfaces

Parallel RGB data: Up to 40 groups
Serial data: 64 groups
Connectors: DDR3 connectors
LVDS transmission: Supported (dedicated firmware required)

Control

Backup: Dual card backup and status monitoring, loop backup, dual backup of configuration parameters, dual program backup
Monitoring: Temperature and voltage monitoring, bit error detection, status detection of dual power supplies
Certifications: RoHS, EMC Class A

Display

HDR: HDR10 (SMPTE ST 2084, SMPTE ST 2086) and HLG
Frame Rate Adaptive 3.0: Input frame rates from 23 Hz to 240 Hz
Color management: Standard (Rec.709 / DCI-P3 / Rec.2020) and custom color gamuts
Low latency: Can be reduced to 1 frame (only with driver ICs with built-in RAM)
Image rotation: Multiples of 90° (0°/90°/180°/270°)

Electrical

Input voltage: DC 3.8 V to 5.5 V
Rated current: 1 A
Rated power consumption: 5 W

Physical

Operating temperature: -20°C to +70°C
Operating humidity: 10% RH to 90% RH, non-condensing
Storage temperature: -25°C to +125°C
Storage humidity: 0% RH to 95% RH, non-condensing
Dimensions: 67.6 mm × 35.0 mm × 4.3 mm
Net weight: 10.4 g (single receiving card only)
Heat dissipation: Use an aluminum heatsink plate larger than 250.0 mm × 250.0 mm × 3.0 mm, or equivalent heat dissipation

Sources

Source note

The 1024×512@60Hz capacity is stated for 8-bit and 10-bit sources with PWM driver ICs; with 12-bit sources it is 620×512@60Hz. An aluminum heatsink plate is required for heat dissipation.

XA50 Pro Receiving Card Specifications Official specification · V1.0.3 · From the search-index excerpt of the official page · 06.10.2026
XA50 Pro Specifications V1.0.3 Official specification · V1.0.3 · Read directly · 07.10.2026
Official product image — XA50 Pro Official product page · Read directly · 07.10.2026

Dataset: 2026.10.12-1 · last verified: Oct 6, 2026

Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.

NovaStar controllers from the same ecosystem

System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.

NovaStar