MCTRL R5
Sender / controller · MCTRL
- Capacity4.15 MP
- Outputs8 × RJ45
- Max. width3,840 px
- ModeSynchronous
Official product image — source: NovaStar.
NovaStar · Receiving card
A5s
Fully verified
Armor Manufacturer class: Receiving Card
High-end small receiving card; a single A5s supports resolutions up to 320×256@60Hz. It supports pixel level brightness and chroma calibration, individual gamma adjustment for RGB and 3D, and uses high-density connectors with up to 32 groups of parallel RGB data or 64 groups of serial data (expandable to 128).
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 81.9 K px
- Area
- 320×256
- Data groups
- 32
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
Best suited for
- Driving a cabinet or module group of up to 320 × 256 pixels with a single card.
- Permanent installations that need temperature / voltage monitoring.
Key features (manufacturer)
- A single card supports resolutions up to 320×256@60Hz
- Up to 32 groups of parallel RGB data or 64 groups of serial data (expandable to 128 groups of serial data)
- Pixel level brightness and chroma calibration with NovaStar's high-precision calibration system
- Individual gamma adjustment for RGB (NovaLCT V5.2.0 or later and a sending card that supports the function)
- Image rotation in multiples of 90° (0°/90°/180°/270°) and 3D output with a sending card that supports 3D
- Temperature and voltage monitoring, bit error detection and status detection of dual power supplies
- Dual card backup with status monitoring, loop backup, and dual backup of configuration parameters, firmware program and calibration coefficients
- EMC Class B compliant hardware design; input voltage DC 3.8 V to 5.5 V, rated power consumption 2.5 W
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 81,920 px.
Technical specifications
- Backup / redundant line
- Pixel calibration
- Mapping
- Monitoring (temperature / voltage)
Capacity and outputs
- Loading capacity
- 81,920 px
- Official loading area
- 320 × 256 px
- Port speed
- 1 Gbps
- Data groups
- 32
- HUB interface
- High-density connectors ×2 (JH1, JH2)
Connectivity and software
- Software / platform
- NovaLCT
Physical
- Dimensions
- 70.0 mm × 45.0 mm × 8.0 mm
- Weight
- 17.3 g
- Operating temperature
- -20°C to +70°C
- Input voltage
- DC 3.8 V to 5.5 V
- Power consumption
- 2.5 W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Maximum resolution
-
320×256@60Hz
Network
- Ethernet
-
Gigabit Ethernet ports (Port1, Port2) on the high-density connector
Interfaces
- Parallel RGB data
-
Up to 32 groups
- Serial data
-
64 groups (expandable to 128 groups)
- Connectors
-
High-density connectors (JH1, JH2)
- LVDS transmission
-
Supported with dedicated firmware
Control
- Mapping
-
Cabinets display the receiving card number and Ethernet port information
- Monitoring
-
- Temperature and voltage monitoring without peripherals
- bit error detection
- status detection of dual power supplies
- Backup
-
Dual card backup and status monitoring, loop backup, dual backup of configuration parameters, dual program backup, dual backup of calibration coefficients
- Readback
-
Firmware program readback (NovaLCT V5.2.0 or later) and configuration parameter readback
Display
- Calibration
-
Pixel level brightness and chroma calibration with NovaStar's high-precision calibration system
- Individual gamma adjustment for RGB
-
Requires NovaLCT V5.2.0 or later and a sending card that supports the function
- Image rotation
-
Multiples of 90° (0°/90°/180°/270°)
- 3D
-
Works with a sending card that supports the 3D function
Electrical
- Input voltage
-
DC 3.8 V to 5.5 V
- Rated current
-
0.5 A
- Rated power consumption
-
2.5 W
- Certifications
-
RoHS, EMC Class B
Physical
- Operating environment
-
- -20°C to +70°C
- 10% RH to 90% RH, non-condensing
- Storage environment
-
- -25°C to +125°C
- 0% RH to 95% RH, non-condensing
- Dimensions
-
70.0 mm × 45.0 mm × 8.0 mm
- Net weight
-
17.3 g (single receiving card only)
- Packing
-
- Blister pack
- 80 receiving cards per packing box (378.0 mm × 190.0 mm × 120.0 mm)
Sources
Source note
The specification gives the card's capacity as a maximum resolution of 320×256 at 60 Hz.
Dataset: 2026.10.12-1 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
NovaStar controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
MCTRL600
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs4 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL660 PRO
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL700
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
Alternatives in the same category
