MCTRL R5
Sender / controller · MCTRL
- Capacity4.15 MP
- Outputs8 × RJ45
- Max. width3,840 px
- ModeSynchronous
Official product image — source: NovaStar.
NovaStar · Receiving card
MRV366
Fully verified
MRV Manufacturer class: Receiving Card
The MRV366 is a general receiving card that supports up to 1/64 scan and loads up to 512×256 pixels (8bit) or 256×256 pixels (10bit/12bit). It uses standard HUB75 connectors and supports up to 32 sets of parallel RGB data.
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 131.1 K px
- Area
- 512×256
- Data groups
- 32
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
Best suited for
- Driving a cabinet or module group of up to 512 × 256 pixels with a single card.
- Permanent installations that need temperature / voltage monitoring.
Key features (manufacturer)
- Loads up to 512×256 pixels (8bit) or 256×256 pixels (10bit/12bit)
- Supports up to 1/64 scan
- Standard HUB75 connectors and up to 32 sets of parallel RGB data
- 12-bit precision pixel level brightness and chroma calibration with NovaLCT and NovaCLB
- Individual Gamma adjustment for RGB, quick seam correction and 3D function
- Mapping function showing the receiving card number and Ethernet port information
- Voltage and temperature monitoring; bit error rate monitoring with NovaLCT V5.2.0 or later
- Loop backup and dual backup of program
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 131,072 px.
Technical specifications
- Backup / redundant line
- Pixel calibration
- Mapping
- Monitoring (temperature / voltage)
Capacity and outputs
- Loading capacity
- 131,072 px
- Official loading area
- 512 × 256 px
- Port speed
- 1 Gbps
- Data groups
- 32
- HUB interface
- HUB75 ×16
- Max. scan
- 1/64
Connectivity and software
- Software / platform
- NovaLCT, NovaCLB
Physical
- Dimensions
- 145.6 mm × 91.5 mm × 17.2 mm
- Weight
- 100.1 g
- Operating temperature
- –20°C to +70°C
- Input voltage
- DC 3.3 V–5.0 V
- Power consumption
- 2.5 W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Loading capacity (8bit)
-
Up to 512×256 pixels
- Loading capacity (10bit/12bit)
-
Up to 256×256 pixels
- Scan
-
Supports up to 1/64 scan
- RGB data groups
-
Up to 32 sets of parallel RGB data
Network
- Ethernet
-
Gigabit Ethernet Ports (labelled in the appearance picture)
- Loop backup
-
- Main and backup redundant mechanism for cascading of receiving cards
- if either line fails, the other begins to work
Interfaces
- HUB connectors
-
- Standard HUB75 connectors
- pin diagram defines JH1–JH16
- Power
-
Power Connectors (labelled in the appearance picture)
- Indicators
-
Status indicator (green), power indicator (red)
Control
- Mapping function
-
Target cabinets display the receiving card number and Ethernet port information
- Monitoring
-
- Voltage and temperature monitoring without peripherals
- bit error rate monitoring with NovaLCT (V5.2.0 or later)
- Cabinet LCD
-
LCD can display temperature, voltage, single operating time and total operating time of the receiving card
- Readback
-
Readback of firmware program and of configuration parameters in NovaLCT
- Dual backup of program
-
Two copies of application programs are saved in the receiving card at the factory
Display
- Calibration
-
12-bit precision brightness and chroma calibration on each LED, working with NovaLCT and NovaCLB
- Display effect functions
-
- Quick seam correction
- 3D function
- individual Gamma adjustment for RGB (NovaLCT V5.2.0 or later and a controller that supports it)
Electrical
- Input voltage
-
DC 3.3 V–5.0 V
- Rated current
-
0.5 A
- Rated power consumption
-
2.5 W
Physical
- Operating environment
-
- –20°C to +70°C
- 10% RH to 90% RH, non-condensing
- Storage environment
-
- –25°C to +125°C
- 0% RH to 95% RH, non-condensing
- Dimensions
-
145.6 mm × 91.5 mm × 17.2 mm
- Net weight
-
100.1 g
- Certifications
-
RoHS, EMC Class A
- Packing
-
- Antistatic bag and anti-collision foam per card
- each packing box contains 100 receiving cards
- packing box 650.0 mm × 500.0 mm × 200.0 mm
Sources
Source note
The loading capacity is 512×256 pixels at 8-bit; at 10-bit or 12-bit it is 256×256 pixels.
Dataset: 2026.10.12-1 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
NovaStar controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
MCTRL600
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs4 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL660 PRO
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL700
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
Alternatives in the same category
