MCTRL R5
Sender / controller · MCTRL
- Capacity4.15 MP
- Outputs8 × RJ45
- Max. width3,840 px
- ModeSynchronous
Official product image — source: NovaStar.
NovaStar · Receiving card
MRV416-N
Fully verified
MRV Manufacturer class: Receiving Card
The MRV416-N is a general receiving card from NovaStar with 16 standard HUB75E connectors and up to 32 groups of parallel RGB data. With 8bit video sources the maximum load per card is 512×384@60Hz for common driver ICs and 512×512@60Hz for PWM driver ICs.
Price
A quote tailored to your project
The price is provided with the quote, based on quantity, delivery address and project scope.
The price of this product is set by quote. Add it to your cart and request the quote together.
- Setup supportFor Colorlight, NovaStar and Huidu systems we do the setup by connecting remotely with AnyDesk; call us about mounting.
- Compatibility checkCompatibility with the other components is checked during configuration.
- Order trackingShipping and installation status is tracked on your order page.
Key specifications
View Technical Details- Capacity
- 196.6 K px
- Area
- 512×384
- Data groups
- 32
Planning a complete display?Let's calculate the system that works with this device together.
Calculate
Best suited for
- Driving a cabinet or module group of up to 512 × 384 pixels with a single card.
- Permanent installations that need temperature / voltage monitoring.
Key features (manufacturer)
- Maximum load per card with 8bit video sources: 512×384@60Hz (common driver IC), 512×512@60Hz (PWM driver IC)
- 16 standard HUB75E connectors; up to 32 groups of parallel RGB data
- Gigabit Ethernet ports that connect to the sending card and cascade other receiving cards; each can be used as input or output
- Color management with standard (Rec.709 / DCI-P3 / Rec.2020) and custom color gamuts; 18bit+ improves grayscale by 4 times
- Pixel level brightness and chroma calibration; quick adjustment of dark or bright lines; multi-batch adjustment
- Low latency down to 1 frame (driver ICs with built-in RAM), 3D, image rotation in multiples of 90°
- Mapping 1.1, temperature and voltage monitoring, bit error detection, detection of Ethernet cable disconnections
- Loop backup, dual backup of configuration parameters and dual program backup
Capacity and loading area
The card receives data over the Ethernet chain and drives the module group inside this area. The cabinet/module load cannot exceed this area or the capacity of 196,608 px.
Technical specifications
- Backup / redundant line
- Pixel calibration
- Mapping
- Monitoring (temperature / voltage)
Capacity and outputs
- Loading capacity
- 196,608 px
- Official loading area
- 512 × 384 px
- Port speed
- 1 Gbps
- Data groups
- 32
- HUB interface
- HUB75E ×16
Connectivity and software
- Software / platform
- NovaLCT
Physical
- Dimensions
- 145.6 mm × 91.5 mm × 19.3 mm
- Weight
- 104.6 g
- Operating temperature
- -20°C to +70°C
- Input voltage
- DC 3.8 V to 5.5 V
- Power consumption
- 2.5 W
Manufacturer-specific technical data
In the manufacturer's own wording (the original English terms are kept).
Capacity
- Maximum load per card (8bit video sources, common driver IC)
-
512×384@60Hz
- Maximum load per card (8bit video sources, PWM driver IC)
-
512×512@60Hz
Network
- Gigabit Ethernet ports
-
- Connect to the sending card, and cascade other receiving cards.
- Each connector can be used as input or output.
Interfaces
- HUB75E connectors
-
- 16 standard HUB75E connectors
- connect to the module
- Parallel RGB data
-
Up to 32 groups
- 5-pin LCD connector
-
Connect to the LCD
Control
- Backup
-
Loop backup, dual backup of configuration parameters, dual program backup
- Monitoring
-
Temperature and voltage monitoring, bit error detection, detection of Ethernet cable disconnections
- Self-test button
-
Sets the test pattern after the Ethernet cable is disconnected
- Certifications
-
RoHS, EMC Class A
Display
- Color management
-
Standard (Rec.709 / DCI-P3 / Rec.2020) and custom color gamuts
- 18bit+
-
Improves the LED display grayscale by 4 times
- Low latency
-
- Disabled by default
- when enabled, latency can be reduced to 1 frame (only with driver ICs with built-in RAM)
- Image rotation
-
Multiples of 90° (0°/90°/180°/270°)
Electrical
- Input voltage
-
DC 3.8 V to 5.5 V
- Power connector
-
- Connect to the input power.
- Either of the connectors can be chosen.
- Rated current
-
0.5 A
- Rated power consumption
-
2.5 W
Physical
- Operating temperature
-
-20°C to +70°C
- Operating humidity
-
10% RH to 90% RH, non-condensing
- Storage temperature
-
-40°C to +85°C
- Storage humidity
-
0% RH to 95% RH, non-condensing
- Dimensions
-
145.6 mm × 91.5 mm × 19.3 mm
- Net weight
-
104.6 g (single receiving card only)
- Packing
-
- Blister pack
- 100 receiving cards per packing box
- box 625.0 mm × 180.0 mm × 470.0 mm
Sources
Source note
Capacity is recorded for common driver ICs with 8-bit sources; with PWM driver ICs the stated figure is 512×512@60Hz.
- MRV416-N Receiving Card Specifications
- MRV receiving cards
- MRV416-N Specifications V1.0.3
- Official product image — MRV416-N (MRV416-N Specifications V1.0.3)
Dataset: 2026.10.12-1 · last verified: Oct 6, 2026
Interoperability between receiving cards and controllers from different manufacturers is not assumed without official documentation.
NovaStar controllers from the same ecosystem
System components from the same manufacturer. The solution designer calculates whether a specific pairing is technically suitable.
MCTRL600
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs4 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL660 PRO
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
MCTRL700
Sender / controller · MCTRL
- Capacity2.3 MP
- Outputs6 × RJ45
- Max. width3,840 px
- ModeSynchronous
Alternatives in the same category
